SPEAKER CLEANER — EJECT WATER & DUST
▮ READY TO CLEAN
Frequency
165 Hz
3:00
Mode
💧 Water
100% Safe | No Download | Auto-Stop in 3 min
Select Cleaning Mode
💧
Water Eject
165 Hz — Best for water🌊
Deep Clean
200 Hz — Heavy moisture💨
Dust Blower
440 Hz — Dust & debris🔄
Full Sweep
130–250 Hz sweep Fine-Tune Frequency
100 Hz
600 Hz
How to Get Best Results
1
Turn Volume to Maximum 🔊
Max volume = max membrane vibration = better water ejection.
2
Disconnect Bluetooth 🎧
Sound should go through your phone speaker, not earbuds.
3
Place Phone Face-Down 📱
Gravity helps pull released water out through the grill.
4
Wait 2–3 Minutes ⏱
Auto-stops after 3 min. Repeat for heavy water damage.
How It Works
Acoustic Vibration
165Hz causes the speaker membrane to vibrate intensely within its safe range.
Breaks Surface Tension
Vibration breaks water film into droplets that can be expelled.
Gravity Assists
Phone face-down means gravity pulls water out through the grill.
FREQUENTLY ASKED QUESTIONS
Frequently Asked Questions (FAQ)
Yes! The vibrations also help dislodge dust and debris stuck in the speaker grill, restoring clearer audio quality.
Try running the tool again 2–3 times. If the problem persists, some water may have reached internal components. Let your device dry for 24 hours in a warm, dry place before trying again.
Run it for 2–3 minutes. For heavy water exposure, you can run multiple sessions. Place your phone face down so water can drain out more easily.
Absolutely. The frequency and volume levels used are within the safe operating range for all smartphone and laptop speakers. This is the same technique used by Apple Watch's Water Lock feature.
Yes! The tool plays a specific low-frequency sound wave (165Hz) that causes the speaker membrane to vibrate intensely, physically pushing water droplets out of the speaker grill.
Related Guides & Tips